• Suche im Produktkatalog

Ihr Warenkorb enthält

Der Warenkorb ist leer

NEW AND HOT

In den Warenkorb legen
Quantity On Hand: 5
Brand: Adafruit
This HUSB238 breakout plugs into the USB C cable and then over the CC lines will negotiate the PD request and commands. For example we can ask what voltages are available (the standard offerings are 5V, 9V, 12V, 15V, 18V and 20V.) and then pick the highest one. Or if you need a specific voltage it will specifically select that one.
12473 Ihr Preis: 9,50 €
In den Warenkorb legen
Quantity On Hand: 4
Brand: Pimoroni
The NVMe Base is a PCIe expansion card for the Raspberry Pi 5. Add an M-key NVMe SSD (with support from 2230 to 2280) and mount it under your Raspberry Pi for a compact and fast storage solution. It is the ideal solution for turning your Raspberry Pi 5 into a file server, media center, reverse proxy, etc.
12500 Ihr Preis: 21,50 €
In den Warenkorb legen
Quantity On Hand: 4
Brand: Adafruit
The ESP32-S3 has arrived in QT Py format - with dual 240 MHz cores, 4 MB Flash, 2 MB PSRAM, WiFi/BLE support and native USB, this QT Py is great for powering your IoT projects. It has NeoPixel LED and Stemma QT/Qwiic/EasyC for easy I2C sensor connection. Program it using CircuitPython or Arduino IDE.
12501 Ihr Preis: 18,70 €
In den Warenkorb legen
Quantity On Hand: 5
Brand: Raspberry Pi
Raspberry Pi 5 builds on the phenomenal success of Raspberry Pi 4. In comparison with its predecessor, it delivers a 2-3x increase in CPU performance, and a significant uplift in GPU performance, alongside improvements to camera, display, and USB interfacing.
12479 Ihr Preis: 95,00 €
In den Warenkorb legen
Quantity On Hand: 3
Brand: Raspberry Pi
Raspberry Pi 5 builds on the phenomenal success of Raspberry Pi 4. In comparison with its predecessor, it delivers a 2-3x increase in CPU performance, and a significant uplift in GPU performance, alongside improvements to camera, display, and USB interfacing.
12481 Ihr Preis: 119,00 €
In den Warenkorb legen
Quantity On Hand: 2
Brand: Intergalaktik
The ULX3S is a fully open source, compact, robust and affordable FPGA board equipped with a balanced spectrum of extra components and expansions. Onboard peripherals such as SDRAM, USB, Digital video out, FM/ASK antenna, ADC and DAC can make it audio/video powerhouse for signal processing and synthesis, motor control or SDR. If you are just starting with FPGA, you can also use the ULX3S as powerful Arduino and program it using Arduino IDE in seconds.
12470 Ihr Preis: 144,00 €
In den Warenkorb legen
Quantity On Hand: 1
Brand: Intergalaktik
The ULX3S is a fully open source, compact, robust and affordable FPGA board equipped with a balanced spectrum of extra components and expansions. Onboard peripherals such as SDRAM, USB, Digital video out, FM/ASK antenna, ADC and DAC can make it audio/video powerhouse for signal processing and synthesis, motor control or SDR. If you are just starting with FPGA, you can also use the ULX3S as powerful Arduino and program it using Arduino IDE in seconds.
12471 Ihr Preis: 224,00 €
In den Warenkorb legen
Quantity On Hand: 9
Brand: Soldered
easyC is a system for faster prototyping and easy connection between the components. However, some of the components have only one easyC port or you just want your cable managmenet made better. What to do in those cases? The easyC hub comes to the rescue! It has six connectors so you can easily expand your circuit. It’s as simple of a device as it can get.
12472 Ihr Preis: 1,50 €
In den Warenkorb legen
Quantity On Hand: 1
Brand: Devil Design
6x 1.75mm filament spools of different "sweet" colors (pink pearl, pink, bright pink, purple, violet, raspberry red), 0.33 kg of each, 2kg total.
12460 Ihr Preis: 45,00 €
In den Warenkorb legen
Quantity On Hand: 2
Brand: Devil Design
PLA 1.75 mm galaxy blue 1kg.
12464 Ihr Preis: 24,50 €
In den Warenkorb legen
No items available to ship
Brand: Devil Design
TPU 1.75mm beige (skin tone) 1kg.
12465 Ihr Preis: 38,50 €
In den Warenkorb legen
Quantity On Hand: 10
Brand: Raspberry Pi
The Raspberry Pi Pico WH is based on the Raspberry Pi RP2040 chip, but with wireless connectivity added, soldered headers and JTAG connector. Alongside RP2040, a Raspberry Pi-designed chip, which features two ARM Cortex-M0+ cores clocked at 133MHz with 256KB RAM, 26 GPIO pins, and a broad range of interfacing options, there is also Infineon CYW43439 wireless chip which supports IEEE 802.11 b/g/n wireless LAN and BT 5.2.
12457 Ihr Preis: 12,00 €
In den Warenkorb legen
Quantity On Hand: 5
Brand: Raspberry Pi
The new 27W USB-C Power Supply with Power Delivery (PD) will deliver a maximum of 5.1V, 5A enabling the Raspberry Pi 5 to power a wider range of peripherals. The total power drawn from the four USB ports on Raspberry Pi 5 is limited by default to a nominal 600mA; this limit is automatically increased to a nominal 1.6A when the USB-C PD Power Supply is detected.
12454 Ihr Preis: 18,00 €
In den Warenkorb legen
Quantity On Hand: 6
Brand: Raspberry Pi
This red/white case for Raspberry Pi 5 is a refinement of the Raspberry Pi 4 case, with improved thermal features to support the higher peak power consumption of Raspberry Pi 5. It integrates a variable-speed fan, powered and controlled from the dedicated connector on the Raspberry Pi 5.
12455 Ihr Preis: 15,00 €
In den Warenkorb legen
Quantity On Hand: 15
Brand: Raspberry Pi
The Active Cooler provides an alternative cooling solution for users who wish to use their Raspberry Pi 5 under sustained heavy load without a case. It combines a large metal heat sink with a variable-speed fan, powered and controlled via the fan connector. Does not fit in the official Raspberry Pi 5 case.
12456 Ihr Preis: 8,00 €
In den Warenkorb legen
Quantity On Hand: 20
Brand: Raspberry Pi
The board incorporates a quad-core 64-bit Arm Cortex-A53 CPU, clocked at 1GHz. At its heart is a Raspberry Pi RP3A0 system-in-package (SiP), integrating a Broadcom BCM2710A1 die used in the Raspberry Pi 3 with 512MB of LPDDR2 SDRAM. Raspberry Pi Zero 2 W offers 2.4GHz 802.11 b/g/n wireless LAN and Bluetooth 4.2, along with support for Bluetooth Low Energy (BLE).
12063 Ihr Preis: 32,50 €
In den Warenkorb legen
Quantity On Hand: 6
Brand: Arduino
The Arduino Nano ESP32 is the first ever Arduino board based on a ESP32 microcontroller from Espressif, the NORA-W106 module from u-blox®. This module supports both Wi-Fi® and Bluetooth® (5.0 and above), making it an ideal device for IoT development. With USB-C® connector, 16 MB (128 Mbit) of Flash, support for MicroPython & Arduino IoT Cloud enabled, it is a very versatile development board in a standard Nano form factor.
12450 Ihr Preis: 35,00 €
In den Warenkorb legen
Quantity On Hand: 7
Brand: Adafruit
This is a high-quality CP2102N USB-Serial chip that can upload code at a blistering 3 Mbit/s, it has has auto-reset for Arduino/ATmega328 boards and the same RS-485 and GPIO support that the CP2104 has, making it 'drop in' replacement for discontinued CP2104 Friend.
12449 Ihr Preis: 8,50 €
In den Warenkorb legen
Quantity On Hand: 2
The Raspberry Pi 4 Retro Gaming Kit is the best way to create your very own retro gaming console and includes everything you need, including high-quality official Raspberry Pi accessories. RetroPie is already installed on the SD-card, the only thing you have to do is add your favourite games!
12448 Ihr Preis: 145,00 €
In den Warenkorb legen
Quantity On Hand: 5
Brand: PrimaCreator
PLA filament in rainbow colors, best used on big models.
12443 Listenpreis: 27,50 € Ihr Preis: 22,00 € Sie sparen: 5,50 € (20%)
In den Warenkorb legen
Quantity On Hand: 12
Brand: Arduino
Enhanced and improved, the Arduino UNO R4 Minima is armed with a powerful 32-bit microcontroller. The UNO R4 Minima maintains the same form factor, pinout, and 5 V operating voltage as its predecessor, the UNO R3. This ensures a seamless transition for existing shields and projects, leveraging the extensive and unique ecosystem already established for the Arduino UNO.
12434 Ihr Preis: 27,00 €
In den Warenkorb legen
Quantity On Hand: 6
Brand: Arduino
The Arduino UNO R4 WiFi combines the processing power and exciting new peripherals of the Arm® Cortex®-M4 microcontroller with the wireless connectivity power of the ESP32-S3 from Espressif. On top of this, the UNO R4 WiFi offers an on-board 12x8 LED matrix, Qwiic connector, VRTC, and OFF pin, covering all potential needs makers will have for their next project.
12437 Ihr Preis: 39,00 €
In den Warenkorb legen
Quantity On Hand: 6
Brand: Osmtec
This is bipolar NEMA 14 stepper motor with step angle 1.8°, holding torque 23 Ncm, 5 mm axis and motor size 35x35x42 mm. Each phase draws 0.5A at 7.5V, it has 4 wires (length 30 cm) with no connector.
12438 Ihr Preis: 14,90 €
In den Warenkorb legen
Quantity On Hand: 8
Brand: Raspberry Pi
Raspberry Pi 4 Model B key features are a 64-bit quad-core Cortex-A72 processor, dual-display support at resolutions up to 4K, hardware video decode at up to 4Kp60, 4GB of RAM, dual-band 2.4/5.0GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability (via a separate PoE HAT add-on).
11599 Ihr Preis: 85,00 €
In den Warenkorb legen
Quantity On Hand: 2
Brand: E3D
Achieve high-flow results in the same form factor as a standard E3D Revo™ thanks to optimised internal nozzle geometry. High Flow Nozzles can be used with your existing 40W HeaterCores to maximise your flow rate with standard printing materials. 1.4 mm nozzles have a volumetric flow rate of 37mm³/s (based on PLA at 220 °C).
12410 Ihr Preis: 59,00 €
In den Warenkorb legen
Quantity On Hand: 17
Brand: Sunlu
Sunlu PLA 1.75 mm black 1kg.
12407 Ihr Preis: 16,60 €
In den Warenkorb legen
Quantity On Hand: 3
Brand: Polymaker
PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength. Printing temperature ranges from 190 °C to 230 °C (25-60°C for build plate).
12408 Ihr Preis: 25,00 €
In den Warenkorb legen
Quantity On Hand: 3
Brand: Polymaker
PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength. Printing temperature ranges from 190 °C to 230 °C (25-60°C for build plate).
12409 Ihr Preis: 25,00 €
In den Warenkorb legen
Quantity On Hand: 8
Brand: Soldered (e-radionica)
Dasduino Lite is the right choice when you are limited with space, but still looking for capable controller. Based on Attiny1604 (20 MHZ, 16 KB), with USB-C port, Li-ion charger, CH340 USB-UART converter, RGB LED WS2812B, 12 GPIO pins (9 anlog) and easyC/Qwiic/Stemma QT connector - all this in only 38x26 mm. Operating voltage is 5 V, logic level is 3.3 V, there are no headers and it comes with USB-C cable.
12405 Ihr Preis: 6,50 €
In den Warenkorb legen
Quantity On Hand: 2
Brand: Soldered (e-radionica)
Fuel gauge is a special type of accessory for lithium batteries that very precisely measures the state of the battery. This includes current voltage [mV], state of charge [%] and probably most interestingly: remaining capacity in the battery [mAh]. It is used with 1S batteries, and provides all this information via the I2C interface. Board size: 38x22 mm.
12406 Ihr Preis: 6,50 €
In den Warenkorb legen
Quantity On Hand: 3
Brand: Adafruit
Adafruit Feather RP2040 SCORPIO, designed specifically for NeoPixel (WS2812) driving but also good for various other PIO-based projects that want to take advantage of the Feather pinout with 8 separate consecutive outputs (or inputs). 264KB RAM lets you drive thousands of NeoPixels and run your main program uninterrupted, all at the same time!
12399 Ihr Preis: 24,00 €
In den Warenkorb legen
Quantity On Hand: 5
Brand: Adafruit
Adafruit PiCowbell DVI Output for Pico is in stock and ready to display images and graphics from a microcontroller directly to an HDMI monitor or television! Note it doesn't do audio, just graphics.
12400 Ihr Preis: 11,60 €
In den Warenkorb legen
Quantity On Hand: 2
Brand: Adafruit
This little lipo charger is designed to fit onto the back of any QT Py board, and make it easy for portable powering. Simply plug any standard 3.7V/4.2V lithium polymer or lithium-ion rechargeable battery into the JST plug on the end. When powered by the USB port on the QT Py, the charger kicks in and will charge up the battery at 200mA max rate.
12401 Ihr Preis: 8,25 €
In den Warenkorb legen
Quantity On Hand: 22
Mini solar panel, 12V 150mA 1.8W, without wires, 110x110 mm.
12392 Ihr Preis: 8,00 €
In den Warenkorb legen
Quantity On Hand: 26
Input voltage 12 V, output volatage 4.2 V, max. charging current 2 A, PWM switching frequency 300 KHz, working temperature -40 °C to +85 °C, dimensions 45x20x9.5 mm.
12393 Ihr Preis: 7,50 €
In den Warenkorb legen
Quantity On Hand: 24
This board allows you to turn on and off, and control the speed of motors or micro pumps or the brightnes of LED lighting. Input (3.3-20 VDC) and output (3.7-27 VDC, up to 10 A) are completely isolated, PWM frequency: 0-20KHz, board size: 22.7x36.8 mm.
12394 Ihr Preis: 4,90 €
In den Warenkorb legen
Quantity On Hand: 10
This is a classic Arduino Nano V3 compatible board based on ATmega328 chip (32KB flash, 2KB SRAM, 1KB EEPROM, 16 MHz clock) with 5V logic level, 14 digital I/O pins (6 PWM) and 8 analog inputs. It comes with soldered headers and USB-C Type connector.
11069 Ihr Preis: 11,30 €
In den Warenkorb legen
Quantity On Hand: 5
Brand: Raspberry Pi
The standard Raspberry Pi Camera Module 3 is a compact camera from Raspberry Pi with a 66 degrees field of view. It offers an IMX708 12-megapixel sensor with HDR, and features phase detection autofocus.
12370 Ihr Preis: 40,00 €
In den Warenkorb legen
Quantity On Hand: 8
This kit contains aluminum chasis, four motors and four omnidirectional (AKA mecanum) wheels with the mounting screws set.
12353 Ihr Preis: 25,00 €
In den Warenkorb legen
Quantity On Hand: 1
Brand: Polymaker
PolyTerra PLA is a bioplastic 3D printing filament in which organic materials have been combined with PLA to reduce the plastic content and develop a more environmentally friendly filament. PolyTerra prints just like PLA, so no print settings need to be changed, printing temperature ranges from 190 °C to 230 °C (25-60°C for build plate).
12344 Ihr Preis: 22,00 €
In den Warenkorb legen
Quantity On Hand: 1
Brand: Polymaker
PolyTerra PLA is a bioplastic 3D printing filament in which organic materials have been combined with PLA to reduce the plastic content and develop a more environmentally friendly filament. PolyTerra prints just like PLA, so no print settings need to be changed, printing temperature ranges from 190 °C to 230 °C (25-60°C for build plate).
12346 Ihr Preis: 22,00 €
In den Warenkorb legen
Quantity On Hand: 4
Brand: Adafruit
This kit uses electromagnetic fields and inductive coupling to pass power through the air to light up little LEDs soldered onto coils. No wires needed! Each kit comes with one inductive coil connected to driver board (you'll need a 5V/2A power supply to power it - mobile phone charger will do) and ten small LED inductors in an assortment of colors (two each of white, blue, yellow, green, and red).
12281 Ihr Preis: 26,00 €
In den Warenkorb legen
Quantity On Hand: 3
Brand: Adafruit
This kit uses electromagnetic fields and inductive coupling to pass power through the air to light up little LEDs soldered onto coils. No wires needed! Each kit comes with one inductive coil connected to driver board (you'll need a 24V/2A power supply to power it) and ten large LED inductors in an assortment of colors (two each of white, blue, yellow, green, and red).
12282 Ihr Preis: 49,50 €
In den Warenkorb legen
Quantity On Hand: 30
Brand: Adafruit
This small LED has miniature inductor which makes it possible to light up with no wires attached! Working distance is up to 100 mm with large or 80 mm with small inductive coil (sold separately). Dimensions: 4.5 mm diameter, 4.8 mm height.
12287 Ihr Preis: 1,70 €
In den Warenkorb legen
Quantity On Hand: 28
Brand: Adafruit
This wireless LED has miniature inductor which makes it possible to light up with no wires attached! Working distance is up to 200 mm with large or 90 mm with small inductive coil (sold separately). Dimensions: 5 mm diameter, 6.1 mm height.
12290 Ihr Preis: 1,70 €
In den Warenkorb legen
Quantity On Hand: 5
Brand: Adafruit
This board allows you to use I2C over long cables - up to 3m @ 400 KHz and up to 30m @ 100 KHz via Ethernet cable! Just connect it to your I2C bus at the beginning of the chain, no special firmware, software, or configuration required. Runs with any bus voltage, from 1.6V to 5.5V and up to 400 KHz SCL speed, with cables up to 4000pF.
12294 Ihr Preis: 15,00 €
In den Warenkorb legen
Quantity On Hand: 5
Brand: Adafruit
The PiCowbell Proto is the same size and shape as a Pico, and is intended to socket underneath to make programming and sensor connectivity easy. Reset button? Yes! STEMMA QT/Qwiic/EasyC connector for fast I2C? Indeed.To keep things flexible, this PiCowbell does not come with headers: you choose which configuration suits you best, you can even solder Pico directly to the board.
12296 Ihr Preis: 3,80 €
In den Warenkorb legen
Quantity On Hand: 9
Brand: Seeed Studio
XIAO RP2040 is an Arduino-compatible microcontroller featuring the Raspberry Pi RP2040 chip. Its signature values of high performance, low cost, ease of use, and tiny thumb size make it perfect for TinyML, smart wearable devices, and IoT projects.
12266 Ihr Preis: 8,25 €
In den Warenkorb legen
Quantity On Hand: 11
ToF distance ranging sensor, 40 mm to 4 m, 3.3-5 V power and logic, I2C communication, dimensions 10x25x5 mm.
12269 Ihr Preis: 12,00 €
In den Warenkorb legen
Quantity On Hand: 4
This module lets you control up to 16 servo motors or any other kind of PWM outout over single I2C connection. It supports both 3.3V and 5V logic, has 12-bit resolution for each output and adjustable PWM frequency up to 1.6 KHz.
12271 Ihr Preis: 13,00 €
In den Warenkorb legen
Quantity On Hand: 20
Expansion and power shield for 30-pin ESP32 boards, USB-C and Micro 5V inputs and 6.5-16 V DC jack input, SGV (Signal-Ground-Voltage) 3-pin output for all GPIO pins with jumper selectable voltage (3.3 or 5 V power) and I2C extended interface (2 groups). Dimensions 68.6x53.4 mm.
12280 Ihr Preis: 3,50 €
In den Warenkorb legen
Quantity On Hand: 8
Brand: Soldered (e-radionica)
Dasduino CORE is based on Atmel Atmega328P microcontroller we all know and love. It has 14 digital and 6 analog pins, which is plenty for almost all projects. It comes with a USB Type-C connection and is 100% compatible with the original Arduino boards and Arduino IDE.
12258 Ihr Preis: 10,50 €
In den Warenkorb legen
Quantity On Hand: 9
Brand: Soldered (e-radionica)
The APDS-9960 is a small sensor that measures four things at once. It is possible to recognize the movements you make in front of it (up, down, left, right) and it can identify the vicinity of the object, so you have two more movements: to the sensor and from the sensor. In addition, it has an ambient light sensor and a color sensor which gives red, green, and blue (RGB) colors as output.
12250 Ihr Preis: 6,50 €
In den Warenkorb legen
No items available to ship
Brand: Soldered (e-radionica)
This module allows you to connect a Arduino, or similar microcontroller, to a RS-485 communication protocol. The RS-485 is used to send data over long distances (up to 1200m) at 20Mbps and in high-noise environments, such as industrial. The module works on 5V and requires between 120μA and 500μA of current.
12251 Ihr Preis: 4,65 €
In den Warenkorb legen
Quantity On Hand: 1
Brand: Fiberlogy
Thanks to a half matte, satin finish, FiberSatin provides for an unusual appearance of the model. It effectively reduces the visibility of layers, providing a uniform print surface. It successfully prints with the typical PLA settings.
12243 Ihr Preis: 36,50 €
In den Warenkorb legen
Quantity On Hand: 18
Brand: Raspberry Pi
The Raspberry Pi Pico W is based on the Raspberry Pi RP2040 chip, but with wireless connectivity added. Alongside RP2040, a Raspberry Pi-designed chip, which features two ARM Cortex-M0+ cores clocked at 133MHz with 256KB RAM, 26 GPIO pins, and a broad range of interfacing options, there is also Infineon CYW43439 wireless chip which supports IEEE 802.11 b/g/n wireless LAN (and BT 5.2 which is currently not supported).
12201 Ihr Preis: 11,00 €
In den Warenkorb legen
Quantity On Hand: 6
Brand: BBC micro:bit
The BBC micro:bit V2.2 is a pocket-sized computer that introduces you to how software and hardware work together. It has an LED light display, buttons, sensors and many input/output features that, when programmed, let it interact with you and your world. Micro:bit V2.2 with sound adds a built-in microphone and speaker, as well as an extra touch input button and a power button.
12202 Ihr Preis: 24,00 €
In den Warenkorb legen
Quantity On Hand: 1
Brand: E3D
Smaller, lighter, and better than ever before, Revo Micro HotEnd uses the smallest heatsink E3D has produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, it's ideal upgrade for Original Prusa Mini/Mini +.
12162 Ihr Preis: 116,66 €
In den Warenkorb legen
Quantity On Hand: 1
Brand: E3D
Smaller, lighter, REDDER. Say hello to the Revo Voron, the HotEnd of choice for Voron 3D printers. The Revo-compatible cold side was developed in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!
12164 Ihr Preis: 108,04 €
In den Warenkorb legen
Quantity On Hand: 3
Brand: E3D
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening, just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Please note, you may need to adjust your Z offset when changing nozzles.
12166 Ihr Preis: 28,27 €
In den Warenkorb legen
Quantity On Hand: 12
Brand: Trianglelab
Quality replacement brass nozzle for Creality 3D printers, nozzle diameter 0.4 mm, for 1.75 mm filament.
12150 Ihr Preis: 5,84 €
In den Warenkorb legen
Quantity On Hand: 11
Brand: Gates
Hight quality Gates synchronous belt with clothed teeth and fiberglas reinforcement, 6 mm wide, sold by meter.
12144 Ihr Preis: 5,91 €
In den Warenkorb legen
Quantity On Hand: 2
Brand: Fiberlogy
This filament is created 100% in the recycling process. It is obtained from raw material derived from carefully selected and verified sources and it's not inferior to its traditional counterparts. Available in anthracite color only.
12137 Ihr Preis: 28,50 €
In den Warenkorb legen
Quantity On Hand: 6
Heat set inserts have a grooved outside, with theads on the inside. Originally they were designed for injection molded parts but they work fabulously for 3D printed plastic as well. It's a 10 pieces pack, for M3 screws, 4 mm in height and 4.2 mm outer diameter.
12123 Ihr Preis: 2,79 €
In den Warenkorb legen
Quantity On Hand: 26
Heat set inserts have a grooved outside, with theads on the inside. Originally they were designed for injection molded parts but they work fabulously for 3D printed plastic as well. It's a 10 pieces pack, for M3 screws, 3 mm in height and 4.5 mm outer diameter.
12124 Ihr Preis: 2,90 €
In den Warenkorb legen
Quantity On Hand: 3
Brand: DFRobot
The Geiger counter can only detect ionizing radiation, such as nuclear radiation, X-rays, cosmic rays, etc. This product is not a professional measuring instrument and is only suitable for principle research and teaching demonstration. Not for use in radiation dose measurement that directly affects personal safety.
12094 Listenpreis: 98,61 € Ihr Preis: 78,89 € Sie sparen: 19,72 € (19%)
In den Warenkorb legen
Quantity On Hand: 3
Brand: Adafruit
The ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has built-in native USB so it can act like a keyboard/mouse, MIDI device, disk drive, etc! It comes with 4 MB flash and 2 MB PSRAM, but only has a single-core 240 MHz chip and no Bluetooth support. Works with Arduino or CircuitPython, has easyC/Qwiic/Stemma QT I2C connector and LiPo battery connector and charger.
12015 Ihr Preis: 25,08 €
In den Warenkorb legen
Quantity On Hand: 17
Brand: Adafruit
The AHT20 is a nice but inexpensive temperature and humidity sensor from the same folks that brought us the DHT22. You can take sensor readings as often as you like, and it uses standard I2C so its super easy to use with any Arduino or Linux/Raspberry Pi board.
12016 Ihr Preis: 7,30 €
In den Warenkorb legen
Quantity On Hand: 3
Brand: Adafruit
This RFID tag is really unique: it works with mobile phones just like other RFID tags, but you can reprogram it over I2C. The tag shows up as an ISO/IEC 15693 (13.56MHz) chip which is readable by phones and tablets. Note that the most popular hobby RFID reader/writer chips like the PN532 do not support ISO15693, but both Apple and Android phones can be used to read the tags with success.
12017 Ihr Preis: 5,97 €
In den Warenkorb legen
Quantity On Hand: 36
Analog output capatitive soil moisture senzor, output voltage 0~3 VDC, operating voltage 3.3~5.5 VDC, with Gravity 3-pin connector and Gravity to Dupont 3-pin cable. Dimensions 98x23 mm.
11995 Ihr Preis: 2,50 €
In den Warenkorb legen
Quantity On Hand: 3
Brand: Micro Swiss
All metal hotend with thermal heat break made from titanium alloy which has a well-defined melt zone. It fits most of Creality 3D printers (see full description for detailed list of compatible printers), no modifications on your 3D printer necessary.
11971 Ihr Preis: 66,10 €
In den Warenkorb legen
Quantity On Hand: 3
Brand: Raspberry Pi
The Raspberry Pi PoE+ HAT is an add-on board for Raspberry Pi computers with PoE pins, including Raspberry Pi 3B+ and Raspberry Pi 4. It is used to power Raspberry Pi via an Ethernet cable, provided that power-sourcing equipment is installed on the Ethernet network. The HAT also includes a fan that will cool the Raspberry Pi processor.
11968 Ihr Preis: 34,00 €
In den Warenkorb legen
Quantity On Hand: 21
One of the smallest ESP32 development boards available, it's pinout is compatible with ESP8266 based D1 Mini board, so D1 shields can be used with this board too. Comes with female pin header set (not soldered), including the one pair with extra long pins for shields.
11918 Ihr Preis: 13,00 €
In den Warenkorb legen
Quantity On Hand: 2
Brand: Creality
Glass plate that fits Creality Ender 3 Max, CR-10 V2, CR-X and CR-10S Pro/Pro V2.
11956 Ihr Preis: 28,90 €
In den Warenkorb legen
Quantity On Hand: 6
Brand: Micro Swiss
This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
11954 Ihr Preis: 18,00 €
In den Warenkorb legen
Quantity On Hand: 4
Brand: Micro Swiss
This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
11955 Ihr Preis: 18,00 €
In den Warenkorb legen
Quantity On Hand: 1
Brand: E3D
Made from a hardened tool-steel base, they are then Nickel plated to maintain hardness at elevated temperatures, and have a WS2 coating applied to provide the nozzle with reduced stick properties. Rated to a maximum temperature of 500°C, Nozzle X prints every printable material*, from PLA all the way to Carbon Fibre-filled PEEK without wearing.
11960 Ihr Preis: 42,34 €
In den Warenkorb legen
Quantity On Hand: 1
Brand: e-radionica
Inkplate 6 has stunning 6 inch e-paper display with refresh rate of 1.26s, with partial update 264ms, greyscale mode and partial updates support. Powered by ESP32, you will have strong microcontroller with WiFi and Bluetooth on your disposal. Using our Arduino library, it's 5 minute work to get the board running for you. It's 100% open-source for both software and hardware, so it's OSHWA certified.
11953 Ihr Preis: 95,00 €
In den Warenkorb legen
Quantity On Hand: 2
Brand: Adafruit
The latest from Feather family, this one is based on Raspberry Pi's RP2040 microcontroller, a dual core 32-bit ARM Cortex M0+ @ 133MHz, the same one Raspberry Pi Pico uses. It can be programmed using CircuitPython, MicroPython or C/C++ (Arduino IDE support is recently added, VS Code can be used too).
11948 Ihr Preis: 18,45 €
In den Warenkorb legen
Quantity On Hand: 5
Brand: Adafruit
Raspberry Pi's RP2040 comes in ItsyBitsy form factor too - dual core 32-bit ARM Cortex M0+ @ 125MHz, the same one Raspberry Pi Pico uses, is surrounded by staggering 23 GPIO's! Four of those are 12-bit analog inputs and 16 are PWM outputs. It can be programmed using CircuitPython, MicroPython or C/C++ (Arduino IDE support is recently added, VS Code can be used too).
11949 Ihr Preis: 15,26 €
In den Warenkorb legen
Quantity On Hand: 6
Brand: Adafruit
This is definetly the smallest RP2040 board, using the same microcontroller as Raspberry Pi Pico - dual core 32-bit ARM Cortex M0+ @ 125MHz had to be mounted on the back side to fit on the board. It has only 13 GPIO pins, but four of them are 12-bit analog inputs and all of them are PWM outputs. It can be programmed using CircuitPython, MicroPython or C/C++ (Arduino IDE support is recently added, VS Code can be used too).
11950 Ihr Preis: 15,26 €
In den Warenkorb legen
Quantity On Hand: 4
Brand: Adafruit
Some microcontrollers, like the ATmega328, have built in EEPROM, but some, especially ARM Cortex's, don't. That's where this petite Adafruit 24LC32 I2C EEPROM Breakout comes in to help! With 32 Kbit (4 KByte) of storage, and handy chainable Stemma QT connectors, it's just the right amount of simple I2C-controllable storage. Since its external to your microcontroller, uploading new flash memory won't wipe the data from this chip.
11951 Ihr Preis: 5,84 €
In den Warenkorb legen
Quantity On Hand: 5
Brand: PrimaCreator
The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. It can be used for PLA, PETG, and even ABS prints as it can withstand temperatures up to 130°C. Dimensions fit any 3D printer with 235x235 mm buildplate (Ender 3/5 and other) and it comes with magnetic surface to attach to the buildplate.
11941 Ihr Preis: 26,00 €
In den Warenkorb legen
Quantity On Hand: 10
Brand: PrimaCreator
PrimaFIX works with the most common materials on the market such as PLA, PET-G, ABS, Wood and Flex. When you use PrimaFIX you should do so with a printer that has a heated build plate as the active substance in PrimaFIX activates when the temperature rises above 40 degrees.
11921 Ihr Preis: 10,50 €
In den Warenkorb legen
Quantity On Hand: 23
Brand: MKS
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 5.5V-36V, 3-5V logic, 256 subdivision. This is revision 2.0.
11894 Ihr Preis: 9,50 €
In den Warenkorb legen
Quantity On Hand: 5
Brand: Adafruit
When connected to your microcontroller it can detect simple gestures, return the amount of red, blue, green, and clear light, or return how close an object is to the front of the sensor. This device uses an I2C interface and STEMMA QT/Qwiic/easyC connectors, so it's easy to wire up and use. Works with both 3.3 and 5V microcontrollers.
11872 Ihr Preis: 12,50 €
In den Warenkorb legen
Quantity On Hand: 2
Brand: Adafruit
This FeatherWing adds a gorgeous 128x64 monochrome OLED plus 3 user buttons to any Feather main board. The display uses only I2C so you can easily connect it up with just two pins used (plus power and ground!). There's an auto-reset circuit and a reset button on the top, plus STEMMA QT/Qwiic/easyC connector.
11873 Ihr Preis: 25,00 €
In den Warenkorb legen
Quantity On Hand: 5
Brand: Adafruit
This brakeout bouard is general purpose USB to GPIO, SPI, I2C - it let's you communicate with sensors, displays etc. directly from your computer, no need for Arduino programming, just writa a simple Python script and run it on your Windows,Linux/mac PC. It even has GPIOs to read or write to LEDs, switches and buttons. This is a new version with USB-C and STEMMA QT/Qwiic/easyC connectors.
11874 Ihr Preis: 22,50 €
In den Warenkorb legen
No items available to ship
Brand: RobotDigg
Neoprene rubber fiberglass open ended GT2 belt reinforced with nylon cloth tooth surface, 2mm pitch, 6mm width, sold per meter (max 10 m continuous roll).
11875 Ihr Preis: 3,85 €
In den Warenkorb legen
Quantity On Hand: 8
Input voltage 4-40V, output voltage 1.25-36V, max 8A (max 5A recommended for continuous draw), max power 200W, switching frequency 180KHz, efficiency 94%, LED display for output voltage, dimensions 64x47x28 mm.
11883 Ihr Preis: 7,83 €
In den Warenkorb legen
Quantity On Hand: 3
Brand: PJRC
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same size and shape as the Teensy 3.6 (2.4in by 0.7in), and provides greater I/O capability, including an ethernet PHY, SD card socket, and USB host port.
11845 Ihr Preis: 59,00 €
In den Warenkorb legen
Quantity On Hand: 2
Brand: E3D
Original E3D hotend kit that comes with Prusa MK3(S), featuring a Prusa specific heatbreak with a custom internal geometry, this is a drop-in replacement with connectors, but without the Bowden tube.
11833 Ihr Preis: 78,97 €
In den Warenkorb legen
Quantity On Hand: 15
Brand: Raspberry Pi
Raspberry Pi Pico is the first product built on silicon designed in-house at Raspberry Pi (“Raspberry Silicon”). At its heart is RP2040, a Raspberry Pi-designed chip, which features two ARM Cortex-M0+ cores clocked at 133MHz with 256KB RAM, 26 GPIO pins, and a broad range of interfacing options. This is paired with 2MB of on-board QSPI Flash memory for code and data storage.
11805 Ihr Preis: 5,50 €
In den Warenkorb legen
Quantity On Hand: 1
Brand: PJRC
Teensy 4.0 is the latest Teensy, offering the fastest microcontroller and powerful peripherals in the Teensy 1.4 by 0.7 inch form factor. It features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. Teensy 4.0 is the same size and shape as Teensy 3.2, and retains compatibility with most of the pin functions on Teensy 3.2. Teensy 4.0 does not include headers and will need to be purchased separately and soldered on yourself.
11828 Ihr Preis: 45,00 €
In den Warenkorb legen
Quantity On Hand: 7
Brand: LilyGo
Development board based on ESP32 with addition of SIM800L module and LiPo battery connector, in combination with low sleep current makes it perfect for outdoor use. Comes with non-soldered headers and flex GSM antenna.
11746 Ihr Preis: 44,00 €
In den Warenkorb legen
Quantity On Hand: 1
Brand: Adafruit
ItsyBitsy M4 Express is only 36 mm long by 18 mm wide, but has 6 power pins, 23 digital GPIO pins (7 of which can be analog in, 2x analog out, and 18x PWM out). It's the same chip as the Metro M4 or Feather M4 but really really small. It even comes with 2MB of SPI Flash built in, for data logging, file storage, or CircuitPython code.
11719 Ihr Preis: 21,50 €